Feed Pitch Check Menu - MUTOH Falcon II Outdoor Maintenance Manual

5.5.13. Feed Pitch Check Menu

In this menu, you can check the media feed amount for one band by reviewing a sample printing. There is no adjustment
item.
To check the feed pitch, follow the steps below.
Step 1 :
Set media as necessary.
Step 2 :
Select "Adj:SendPitch".
Step 3 :
Select "Pattern 1" or "Pattern 2" to print feed pitch check patterns.
"Pattern 1": Drawn with 1 inch (2.54 cm) intervals
"Pattern 2": Draw a repetitive pattern with 1/4 inch (0.635 cm) intervals every 4 lines and 0.63 cm intervals
between each of the 4 lines.
Step 4 :
Confirm that it is drawn at 1 inch intervals as shown in the following drawing.
Falcon II Outdoor series printers – Maintenance Manual
A = Media feed direction
185 AP-74065, Rev. 1.0, 21/11/03