Position And Function Of The Heating Elements; Falcon Ii Outdoor 2 Heater Printers; Falcon Ii Outdoor 4 Heater Printers - MUTOH Falcon II Outdoor Maintenance Manual

2.5. POSITION AND FUNCTION OF THE HEATING ELEMENTS

2.5.1. Falcon II Outdoor 2 heater printers

Heater element
Pre-heater (Heater A)
Dryer (Heater D)

2.5.2. Falcon II Outdoor 4 heater printers

Heater element
Pre-heater (Heater A)
Fixer (Heater B)
Falcon II Outdoor series printers – Maintenance Manual
Temperature Function
20 – 50°C → Open the pores to make the media more receptive for
eco-solvent or eco-solvent plus™ ink.
20 – 50°C → Applying heating immediately after printing improves
ink/media anchorage.
→ The dryer helps to make the media touch-dry before it
reaches the automatic take-up system.
Temperature Function
20 – 50°C → Open the pores to make the media more receptive
for eco-solvent or eco-solvent plus™ ink.
20 – 70°C → To establish optimum fixation onto the media
(coated and uncoated).
→ Optimizes the dot gain control.
24 AP-74065, Rev. 1.0, 21/11/03