Replacement Of The Heater Element; Falcon Ii Outdoor 2 Heaters : Heater Elements - MUTOH Falcon II Outdoor Maintenance Manual

4.3. REPLACEMENT OF THE HEATER ELEMENT

To replace a heater element of the Falcon II Outdoor series printer, please follow the instructions mentioned in the
explanation of the appropriate heater element.
1. Falcon II Outdoor :
1. Replacing the front heater (Heater D) on a Falcon II Outdoor printer
o
2. Replacing the rear heater (Heater A) on a Falcon II Outdoor printer
o
2. Falcon II Outdoor 4H :
1. Replacing the dryer (Heater D) on a Falcon II Outdoor 4H printer
o
2. Replacing the post-fixer (Heater C) on a Falcon II Outdoor 4H printer
o
3. Replacing the fixer (Heater B) on a Falcon II Outdoor 4H printer
o
4. Replacing the heater (Heater A) on a Falcon II Outdoor 4H printer
o

4.3.1. Falcon II Outdoor 2 heaters : Heater elements

4.3.1.1. Replacing the front heater (Heater D) on a Falcon II Outdoor printer
Before replacing the front heater, make sure to have following items:
50" model : Heat Strip Assy Front 1 50 (EY-80236) and Heat Strip Assy Front 2 50 (EY-80237)
64" model : Heat Strip Assy Front 1 64 (EY-80216) and Heat Strip Assy Front 2 64 (EY-80217)
87" model : Heat Strip Assy Front 1 87 (EY-80226) and Heat Strip Assy Front 2 87 (EY-80227)
4 x sensor insul. Patch (ME-80310)
To replace the front heater on a Falcon II Outdoor printer, please follow the instructions mentioned below.
Step 1 :
Remove side cover L.
Step 2 :
Remove side cover R.
Step 3 :
Remove the front cover.
Caution :
In case the fuse of the heating element is locked, do not replace the fuse but replace
the appropriate heater element. Installation of a fuse of the heater element needs to
be done in a special production environment.
Important :
Before replacing parts, be sure to perform the following operations.
Turn the machine power OFF.
Remove the product's electrical plug from the socket. Otherwise, you may
suffer electric shock or the machine's electric circuits may be damaged.
Disconnect all cables from the machine. Not doing so could cause damage to
the printer.
55
Falcon II Outdoor series printers – Maintenance Manual
AP-74065, Rev. 1.0, 21/11/03