Other Problems - MUTOH Falcon II Outdoor Maintenance Manual

9.3.7. Other problems

No. Phenomenon
1 A hang up occurs
2 The power has been cut off
during the printing operation.
Falcon II Outdoor series printers – Maintenance Manual
Check point Action
(1) The internal • Check the
process operation of operation again
the Mainboard after initializing
assembly may be parameters and re-
malfunctioning. inputting and re-
adjusting them.
(2) The Mainboard • Replace the
assembly may have Mainboard
a problem. assembly.
(1) Make sure that • Securely connect
the power cables the power cables.
are not
disconnected.
(2) Check the power • Check the
cables for a shorted condition using a
condition. tester.
(3) Check for • Check the cables
leakage. for peeled off
insulation and
contact with the
case.
333
Refer to
→ Parameter
backup
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
-
-
-
AP-74065, Rev. 1.0, 21/11/03