5.4.7. History Menu
This menu is used to check the maintenance history and serious error history.
(1) Maintenance history
Maintenance history for the following parts is displayed.
Waste liquid tank capacity (#)
Number of cuts (#)
Number of wipes of the cleaner head (#)
Number of rubs of the cleaner head (#)
Number of drives of the CR motor (#)
Number of drives of the PF motor (#)
Number of printing copies (#)
Number of cleanings (#)
Discharge amount of head ink 1 (A, B nozzles), M dot
Discharge amount of head ink 2 (A, B nozzles), M dot
Discharge amount of head ink 3 (A, B nozzles), M dot
Discharge amount of head ink 4 (A, B nozzles), M dot
Cutter solenoid down times (#)
Notes :
* Elec. *
F1 →
Maintenance
For the CR motor drive count, 1 pass becomes 1 count.
For the PF motor drive count, 10 meters travel becomes 1 count.
For 87-inch specifications, the discharge amount of head ink 5 to 8 (A, B nozzles)
are added.
* Maintenance *
WasteInk
00000000
Cut
00000000
* Maintenance *
Wiper
00000000
Rubbing
00000000
* Maintenance *
CR Motor
00000000
PF Motor
00000000
Falcon II Outdoor series printers – Maintenance Manual
← F2
Error
Waste liquid tank capacity
Number of cuts
(1/9)
Number of wipes of the cleaner head
Number of rubs of the cleaner head
(2/9)
Number of drives of the CR motor
Number of drives of the PF motor
(3/9)
160
AP-74065, Rev. 1.0, 21/11/03