VJ-1204 OPERATION MANUAL
6.1.3
Replacing waste fluid box
This sub-section describes the replacement time and steps of waste fluid box.
(1) Replacement time
Replace waste fluid box when the following situation occurs.
a. If "NearFullWasteInkTank" is displayed on the operation panel
•
Waste fluid box shortly becomes full.
•
Printing operation continues.
•
Replace the waste fluid box.
b. If "FullWasteInkTank" is displayed on the operation panel
•
The waste fluid box is full.
•
Printing operation stops.
•
Immediately replace the waste fluid box.
(2) Type
The waste fluid box that can be used with this printer is as follows.
Description
Waste fluid box
(3) Replacing steps
Follow the procedure below to replace the waste fluid box.
WARNING
• The waste fluid from the printer is industrial waste. Proper waste fluid disposal
according to industrial waste disposal laws and ordinances of your local
government is required. Consign disposal of waste fluids to a specialized
processor.
Model No.
VJ12-HEB
6-9
6 Maintenance