Lubrication/Bonding - MUTOH Falcon II Outdoor Maintenance Manual

8.6. LUBRICATION/BONDING

This section covers the lubrication/bonding information.
After disassembling/assembling this machine, always perform necessary lubrication/bonding according to the table below.
Caution :
Parts
PF Driving U/D gear of the
Components pressurizing arm
Arm motor mounting plate
and intermediate gear
boar diameter part
Deceleration pulley
X-axis deceleration belt
CR Driving Y rail machining drawing
Components
Y rail and Roller guide
Pressurizing axis bearing
Pressurizing cam
Roller guide
Slide idler gear
Driving pulley
CR deceleration belt
Cursor Head U/D colour
Components
Head U/D cam
Slide gear
Do not oil the printer mechanism with oil other than designated by MUTOH. Doing
so may damage the parts or shorten the lifetime.
Apply to the gear
components
Coating the
intermediate gear
boar part
Apply to the driving
pulley
Coating the
deceleration belt
gear intermesh part
Coating the hole
that fastens the Y
drive base
Coating the hole
that fastens the
return pulley
mounting plate
When inserting the
Y rail, apply to the
lower face of the
roller guide.
Coating the upper
part and shaft
insertion part
Apply to the cam
components
Apply to the roller
guide surface.
Apply to the gear
components
Apply to the driving
pulley
Coating the
deceleration belt
gear intermesh part
Apply to the head
U/D colour
Apply to the head
U/D cam
Apply to the gear
components
271
Falcon II Outdoor series printers – Maintenance Manual
Item Manufacturer
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Mitsubishi
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Kanto Kasei Co.,
Ltd.
Type
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
Super multi dia
tetra No.32
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
AP-74065, Rev. 1.0, 21/11/03