Problems Relating To Online And Functions - MUTOH Falcon II Outdoor Maintenance Manual

9.3.6. Problems relating to online and functions

No. Phenomenon
1 Online has not been properly
established by Centronics.
2 Online has not been properly
established by the network.
3 Scaling is not functioning
correctly.
4 Mirroring is not functioning
correctly.
Falcon II Outdoor series printers – Maintenance Manual
Check point Action
(1) Check the • Change the
centronics settings setting.
in the operation
panel.
(2) Replace the • Trouble such as
interface cables and an open interface
see if errors still cable or cables that
occur. are too long may
cause
communication
failure. An
instruction must be
given so that only
cables compliant
with the standard
are used.
(3) The program • Upgrade the
ROM may have firmware version.
failed.
(4) The Mainboard • Replace the
assembly may have Mainboard
a problem. assembly.
(1) Check if the • Use 100BASE-T
cables in use for cross cables for
connections are direct connections
correct. to the host.
• Use 100BASE-T
straight cables for
connections using
HUBs.
(2) Check the • Reset the settings
network settings in upon confirmation
the operation panel by an network
for problems. administrator.
(1) The program • Upgrade the
ROM may have firmware version
failed.
(2) The Mainboard • Replace the
assembly may have Mainboard
330
Refer to
→ User's Guide
-
→ Firmware
installation
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
-
→ User's Guide
→ Firmware
installation
→ Replacing the
AP-74065, Rev. 1.0, 21/11/03