Operations In Self-Diagnosis Mode; Operating Self-Diagnosis Mode - MUTOH Falcon II Outdoor Maintenance Manual

5.3. OPERATIONS IN SELF-DIAGNOSIS MODE

This section explains how to operate in the self-diagnosis mode and provides the list of available diagnosis items.

5.3.1. Operating Self-Diagnosis Mode

Follow the operation flow shown below to operate the self-diagnosis mode.
For more detailed operation steps, refer to the flow chart of the applicable diagnosis item.
Press the [MENU ↑] key or the [MENU ↓] key on the operation panel to change over the diagnosis menu.
Step 1 :
Step 2 :
Press the [F1] key, [F2] key, [F3] key or [F4] key to select the applicable diagnosis item.
Falcon II Outdoor series printers – Maintenance Manual
149 AP-74065, Rev. 1.0, 21/11/03