Endurance Running Menu - MUTOH Falcon II Outdoor Maintenance Manual

5.9. ENDURANCE RUNNING MENU

In this menu, you can perform endurance running on the printer heads.
The Endurance Running menu includes the following items.
Initialization item
CR Motor
PF motor
Razor Blade
Head up/down
Head lock
Pump
Lever motor
Nozzle print
General endurance
Confirmation
* Life *
F1 →
CR motor
F3 →
Cutter
* Life *
F1 →
Head Lock
F3 →
Lever Motor
* Life *
F1 →
Total Life
Description
Performs carriage stroke.
Drives the PF motor.
Cuts media.
Changes over the head height repeatedly.
Tests head lock operation.
Performs wiper up/down operation via the selecting
menu.
Drives the positive/negative pressure pump motor.
Drives the lever motor.
Prints out a printing by printer heads repeatedly.
Performs endurance running on the CR, PF and
head up/down concurrently.
Check the number of endurance running cycles.
197
Falcon II Outdoor series printers – Maintenance Manual
← F2
PF motor
← F4
Head U/P
(1/3)
← F2
Pump
← F4
Nozzle
(2/3)
← F2
Check
(3/3)
Refer to
CR Motor Endurance Menu
PF Motor Endurance Menu
Cutter Endurance menu
Head Up/Down Endurance
Menu
Head Lock Endurance
menu
Pump Endurance menu
Sequential Printing
Endurance Menu
Sequential Printing
Endurance Menu
General Endurance Menu
Endurance Running Check
Menu
AP-74065, Rev. 1.0, 21/11/03