Chapter 4. Instantiating The Nios Ii Processor; Core Nios Ii Tab - Altera Nios II User Manual

February 2014
NII51004-13.1.0
NII51004-13.1.0
This chapter describes the Nios
Processor parameter editor allows you to specify the processor features for a
particular Nios II hardware system. This chapter covers the features of the Nios II
processor that you can configure with the Nios II Processor parameter editor; it is not
a user guide for creating complete Nios II processor systems.
f
To get started designing custom Nios II systems, refer to the
Development
Development kits for Altera devices, available on the
the Altera website, also provide ready-made hardware design examples that
demonstrate different configurations of the Nios II processor.

Core Nios II Tab

The Core Nios II tab presents the main settings for configuring the Nios II processor.
Table 4–1. Core Nios II Tab Parameters (Part 1 of 2)
Nios II Core
Hardware multiplication type
Hardware divide
Reset vector memory
Reset vector offset
Reset vector
Exception vector memory
Exception vector offset
Exception vector
© 2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX are Reg. U.S. Pat. & Tm. Off.
and/or trademarks of Altera Corporation in the U.S. and other countries. All other trademarks and service marks are the property of their respective holders as described at
www.altera.com/common/legal.html. Altera warrants performance of its semiconductor products to current specifications in accordance with Altera's standard warranty, but
reserves the right to make changes to any products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any
information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
Nios II Processor Reference Handbook
February 2014
4. Instantiating the Nios II Processor
®
II Processor parameter editor in Qsys. The Nios II
Tutorial.
Name
Select a Nios II Core
Refer to
Hardware Arithmetic Operation
Refer to
Reset Vector
Refer to
Exception Vector
Refer to
Nios II Hardware
All Development Kits
Description
"Core Selection" on page 4–2.
"Multiply and Divide Settings" on page
"Reset Vector" on page 4–3.
"General Exception Vector" on page
page of
4–2.
4–3.
Subscribe