Mazda RX-8 Workshop Manual page 3568

< Previous Next >
2011 - RX-8 - Body and Accessories
POWER WINDOW MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See
3. Remove the front door trim. (See
4. Remove the bolts.
5. Remove the power window motor from the power window regulator drum.
6. Disconnect the power window motor connector.
7. Install in the reverse order of removal.
NOTE:
When installing the power window motor to the power window regulator drum,
the drum housing tab may come off the door unit.If this happens, remove the
door speaker, insert your hand in the speaker installation hole, connect the
drum housing tabs, and while supporting the drum housing, install the power
window motor to the drum.
< Previous Next >
INNER GARNISH
FRONT DOOR TRIM
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
Back to Top