Mazda RX-8 Workshop Manual page 3542

13. Connect the AM/FM antenna and the filament connectors.
14. Install the following parts:
a. Rear package trim (See
b. Rear pillar trim (See
c. Tire house trim (See
d. Rear seat (See
15. Allow the sealant to harden completely. Sealant hardening time: 24 h
16. Apply soapy water to the rear window molding side and blow air from the interior, then verify that there are no bubbles or air
leakage.
If there are any bubbles or air leakage, repair the damaged part of the sealant and verify it again.
< Previous Next >
REAR PACKAGE TRIM
REAR PILLAR TRIM REMOVAL/INSTALLATION.)
TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
REAR SEAT REMOVAL/INSTALLATION.)
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
Back to Top