Mazda RX-8 Workshop Manual page 3668

VERIFY KEY 2 PROGRAMMING PERFORMED CORRECTLY
8
Start the engine using key 2.
Verify that the security light and keyless warning light operate as shown in the following
figure.
Turn the ignition switch to the LOCK position and remove key 2.
Are there other keys to be programmed?
VERIFY CARD KEY PROGRAMMING PERFORMED CORRECTLY
9
Bring the programmed card key into the vehicle.
Close all doors.
Remove the key from the key cylinder and place it on the front passenger's seat.
Start the engine using the card key.
Verify that the security light and keyless warning light operate as shown in the following
figure.
Repeat Step 8 using each
Yes
programmed key.
No Go to the next step.