Mazda RX-8 Workshop Manual page 3733

< Previous Next >
2011 - RX-8 - Body and Accessories
KEYLESS RECEIVER INSPECTION [WITH ADVANCED KEYLESS ENTRY AND
START SYSTEM]
1. Measure the voltage or inspect for continuity according to the Terminal Voltage Table
(Reference).
If the voltage is not as specified in the Terminal Voltage Table (Reference),
inspect the parts under "Inspection item(s)" and related wiring harnesses.
2. If the system does not work properly even though the inspection items or related wiring
harnesses do not have any malfunction, perform symptom troubleshooting [KEYLESS ENTRY
SYSTEM].
Terminal Voltage Table (Reference)
Signal
Terminal
name
Power
A
supply
Connected to
Keyless
control Under any condition
module
Keyless
Measured condition
Terminal used for communication therefore
Voltage
Inspection item(s)
(V)/Continuity
B+
Keyless
control
module
Related
wiring
harnesses