Mazda RX-8 Workshop Manual page 3744

< Previous Next >
2011 - RX-8 - Body and Accessories
TRUNK LID LATCH AND OPENER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the trunk end trim. (See
3. Detach the rod.
4. Disconnect the trunk lid opener connector and the trunk compartment light connector.
5. Remove the bolts, then remove the trunk lid latch and opener.
6. Install in the reverse order of removal.
< Previous Next >
TRUNK END TRIM
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
Back to Top