Mazda RX-8 Workshop Manual page 3662

position.
No.6 Programming Procedure Due to Keyless Control Module Replacement
CAUTION:
The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
NOTE:
Before beginning the procedure, verify that the customer has turned in all of the card keys and keys for the vehicle.
The engine cannot be started unless an card key and two or more keys are programmed after the replacement.
Conditions
Have two or more keys to be programmed after the replacement.
Have one or more card keys to be programmed after the replacement.
Procedure
Step
REPLACE KEYLESS CONTROL MODULE
1
Procedure
Procedure is completed
Action after procedure
Go to the next step.