Mazda RX-8 Workshop Manual page 3596

< Previous Next >
2011 - RX-8 - Body and Accessories
SEAT WARMER SWITCH INSPECTION
1. Verify that the continuity between the seat warmer switch terminals is as indicated in the
table.
If not as indicated in the table, replace the seat warmer switch.
2. Connect the battery terminal to the G terminal of the seat heater switch and connect the
ground (earth terminal) to the A terminal. Then make sure the indicators illuminate normally.
If malfunction, replace the seat warmer switch.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
Back to Top