< Previous Next >
2011 - RX-8 - Body and Accessories
POWER OUTER MIRROR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See
3. Remove the front door trim. (See
4. Disconnect the power outer mirror connector.
5. Remove the screws.
6. Push the power outer mirror against the vehicle and detach the tab while lifting the mirror up
to remove.
7. Install in the reverse order of removal.
< Previous Next >
INNER GARNISH
FRONT DOOR TRIM
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
Back to Top