< Previous Next >
2011 - RX-8 - Body and Accessories
FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION
1. Remove the following parts:
a. Inner garnish (See
b. Front door trim (See
c. Front door glass (See
d. Front door speaker (See
e. Front door unit (See
2. Detach the cables from the inner handle and the door lock knob.
3. Detach the rods from the key cylinder and the front outer handle.
4. Remove the screws, then remove the front door latch and lock actuator.
5. Install in the reverse order of removal.
< Previous Next >
INNER GARNISH
FRONT DOOR TRIM
FRONT DOOR GLASS
FRONT DOOR SPEAKER
FRONT DOOR UNIT
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
Back to Top