Mazda RX-8 Workshop Manual page 3739

< Previous Next >
2011 - RX-8 - Body and Accessories
KEYLESS BEEPER REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY
AND START SYSTEM]
1. Disconnect the negative battery cable.
2. Remove the rear bumper. (See
3. Remove the nuts.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
< Previous Next >
REAR BUMPER
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
Back to Top