Mazda RX-8 Workshop Manual page 3740

< Previous Next >
2011 - RX-8 - Body and Accessories
REQUEST SWITCH REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS
ENTRY AND START SYSTEM]
Driver-side/passenger-side
1. Disconnect the negative battery cable.
2. Remove the front door trim. (See
3. Remove the front outer handle. (See
4. Remove the screws A, then remove the handle seat and plate.
5. Remove screw B, then remove the request switch.
Trunk Lid
FRONT DOOR TRIM REMOVAL/INSTALLATION.)
FRONT OUTER HANDLE REMOVAL/INSTALLATION.)