Setting Cassette Paper Size - Printronix L5000 Series Maintenance Manual

Multifuction printer

Hide thumbs Also See for L5000 Series:

Table of Contents

Setting Cassette Paper Size

There are three holes in the forward end of the cut-sheet paper feed cassettes. Plastic

inserts are to be set in these holes according to the size of the cut-sheet paper loaded

in the cassette (as shown in the table below).

When the plastic inserts in the cassette contact the paper size sensors on the printer,

the printer determines that the paper cassette is in position and identifies the paper

The available settings for the paper feed cassette are provided in the following table

(O = plastic insert):

IPS 10, 11, and 12 = Upper-level Paper Size Detector Sensors

IPS 10, 11, and 12 = Upper level paper size detector sensors

IPS 20, 21, and 22 = Lower-level Paper Size Detector Sensors

IPS 20, 21, and 22 = Lower level paper size detector sensors

Table of Contents