Changing Cassette Paper Size - Printronix L5535 User Manual

3. Cover the cassette and insert it into the printer, making sure it
is completely seated. If the cassette is not seated, a paper jam
may result.
4. If you are reloading paper following a "CUT-SHEET PAPER
EMPTY" message with the printer power on, press ONLINE to
place the printer online. The printer resumes printing.
NOTE: Occasionally, paper may become moist and wavy, resulting
in poor print quality. If this occurs, remove the wavy sheets
of paper from the cassette and replace them with those
from a new package.
In order to minimize the possibility of a paper jam:
•
Only use xerographic quality paper.
•
Load paper in a cassette which has been adjusted for the exact
paper size. (To set the cassette for the paper size, see the
following section.)
•
Do not gather loose paper for use.
•
Do not use wrinkled, folded, or moist paper.
•
Do not leave paper in the cassettes overnight.
•
Always store unused paper in a clean, dry area protected from
sunlight.
•
If a paper package is opened but not fully used, rewrap and
seal the package and store it properly for future use.

Changing Cassette Paper Size

The cut sheet paper option comes with four cassettes (paper trays)
preconfigured for either U.S. or Metric paper sizes. An optional
custom (special) tray for variable cut sheet lengths is also available.
If the configurations of these cassettes do not meet your needs,
you can reconfigure the cassettes as described below, or you can
buy additional cassettes.
Changing Cassette Paper Size
35