Printronix L5000 Series Maintenance Manual page 235

3. Activates the jam detecting task.
4. Ejects the unfixed portion of the remaining paper.
Activates the tractor motor, and transports the perforation that was at the transfer
point to the cutter position. At this time, the flash lamp is turned on and off with
the tractor motor activation and deactivation, to fix the unfixed portion.
5. Completes the jam detection task.
6. Turns off the vacuum fan and the pre-heat lamp.
7. Turns on the cutter solenoid.
This pulls the paper taut ahead of and behind the cutter position, using the scuff
roller and paper presser.
8. Activates the cutter motor.
Sends the cutter over and back one time along the paper perforation.
9. Turns off the paper solenoid.
This ejects the cut and printed paper.
10. Reverses the tractor motor.
Reverses the tractor motor, to return the leading edge of the unprinted paper left
in the transfer unit to the transfer point.
11. Terminates the main unit feed motor.
12. Transfers to online idling state.
NOTE: Commands to request this operation cannot be received unless the paper
Principles of Operation
back feed sensor has detected paper.
5–75