Table of Contents
Advertisement
12. LED exposure stopped.
When VSYNC signal assertion is terminated, the VDO and VGATE signals are
no longer fed. Therefore, LED exposure also terminates.
13. Transfer/separation charger OFF; separation claw drive deactivation.
The separation claw drive system stops when the leading edge of the last page
passes through. The transfer and separation chargers turn OFF upon completion
of last-page transfer and separation.
14. Fuser OFF.
When the last page passes underneath and beyond the fuser, the fuser turns OFF.
15. Main unit feed motor deactivation; transfer unit descent.
When the last page is output, the main unit feed motor and vacuum fan motor
stop and the transfer unit descends.
16. Drum cleaning (post-printing).
The same operations are performed as stated under fan-fold paper printing (refer
to page 5–64).
17. Printer switched to on-line idling state.
The above operations are performed according to the timing diagram on the
following page. Refer to page 5–69 for the pre-printing and post-printing drum
cleaning timing diagrams, which are the same as indicated for fan-fold paper
printing.
5–72
Principles of Operation
Advertisement
Chapters
Table of Contents
