Table of Contents
Advertisement
12. Remove the new photoreceptor drum from its package. Do not discard the
packaging material, as it will be needed for future drum disposal.
Note that the sides of the drum are identical; there are no front or back sides.
Wipe inside the end-caps of the drum with a cloth to ensure that they are clean.
Exposing the drum to light shortens its life. Do not expose the drum to direct
sunlight, and install it within five minutes under typical room lighting
conditions. When removing the drum from its packaging, do not touch the
surface of the drum, due to the hazardous nature of the material. In addition,
fingerprints and scratches can damage the surface and cause poor print quality.
Das Aussetzen der Trommel an Licht verkürzt ihre Lebensdauer. Setzen Sie die
Trommel nicht dem direkten Sonnenlicht aus und installieren Sie sie innerhalb
von fünf Minuten unter normalen Innenbeleuchtungsbedingungen. Beim
Entfernen der Trommel aus ihrer Verpackung die Trommeloberfläche nicht
berühren, da das Material gesundheitsgefährdend ist. Außerdem können
Fingerabdrücke und Kratzer die Oberfläche beschädigen und verminderte
Druckqualität zur Folge haben.
Never force the drum onto the shaft. If it feels like the drum does not seat
properly, remove the drum and inspect the shaft for any foreign material or
burrs.
13. Using both hands, carefully slide the drum onto the auxiliary rod. When the drum
reaches the area where the auxiliary rod connects to the drum shaft, lift the drum
very slightly over the connection. Then let the drum rest on the rubber rollers as
you guide it into the printer; the drum must rest on the rollers to avoid being
scratched.
In order to position the drum slot and the drum shaft pin, push the drum in all
the way to the back and rotate it until you feel it drop in place. Failure to lock
the drum in place properly may cause severe damage to the printer.
14. Rotate the photoreceptor drum by hand while applying inward pressure until it
seats securely against the rear of the printer. Then rotate the drum to the right
until it moves slightly further into the printer and locks in place.
3–8
DANGER
GEFAHR
CAUTION
CAUTION
Consumables
Advertisement
Chapters
Table of Contents
