Setting Rotary And Dip Switches - Printronix L5000 Series Maintenance Manual

Multifuction printer

Hide thumbs Also See for L5000 Series:

Table of Contents

Setting Rotary and Dip Switches

The rotary switch settings on the MPU board are shown below.

NOTE: To perform an engine self–test, the I/O board, MPU board, and Controller

Board Adjustments

Unit must be connected. Power off the printer. Turn the rotary switch to the

"E" position. Then power on the printer. This prints 30 pages, cuts the paper,

and backs the paper out.

Factory setup

Engine checker mode (Japanese)

Engine checker mode (English)

Table of Contents