Printronix L5000 Series Maintenance Manual page 151

11. With the fuser out of the printer , you can remove the lamp filter for cleaning
(vacuuming). Remove the two screws that secure the filter plate to the fuser unit.
12. Remove the filter and vacuum it. Then install the filter.
13. Before installing the fuser, vacuum any paper dust from the printer frame.
14. Install the fuser, making sure the guide pins in the screw bracket align with the
holes in the side frame of the printer.
Scheduled Maintenance
Screw (4)
Filter Plate
Lamp Duct
Air Filter
Filter Unit
4–33