Overview
This chapter contains the printer main component locations, a system block diagram,
the Printer Control menu, and procedures for dealing with paper jams and printer
errors. The errors are discussed in numerical sequence by error code, as listed in the
chapter contents.
All sensors and motors can be driven and tested using an engine checker (refer
to Chapter 8, "Engine Checker"). If you do not have an engine checker, follow
the procedures in this chapter.
Jam Detection Sensors
Jam detection sensors are located in the following areas:
Paper feed section: Sensors PNES, PBFS
Transfer, separation, and transport sections: Sensors EPS3, EPS4
Transport section after fixing: Sensor EPS0
Paper output section: Sensors EPS1, EPS2
The letter designations (A–D) following the "Paper Jam" error messages match the
sensor positions indicated on the control panel, as shown below.
ONLINE
FAULT
ONLINE
CLEAR
Troubleshooting
JOB IN
STAND BY
PROCESS
CANCEL
PAGE
TEST
SHIFT
EJECT
IMPORTANT
UP
PREV
NEXT
ENTER
DOWN
Sensor
Positions
A – D
7–3