Printronix L5000 Series Maintenance Manual page 154

7. Remove the three screws on the developing unit cover and detach the cover.
Developing Unit
Screw (3)
8. Place the developing unit in the plastic bag and do the following:
a. Remove the developer and toner in the toner hopper by shaking the
b. Rotate the developing unit and shake it, to allow any remaining developer or
9. Remove the developing unit from the plastic bag and place it on a surface.
10. Remove any developer and toner remaining in the toner supply roller and in the
auger by vacuuming the entrance of the toner hopper using a vacuum cleaner
equipped with a narrow nozzle.
4–36
Cover
developing unit up and down with the opening of the toner cartridge facing
downwards.
toner to fall out of the cover slot.
Toner Cartridge
Scheduled Maintenance