Printronix L5000 Series Maintenance Manual page 82

5. Unlock the right tractor only by pushing forward on the tractor lock. Open the
tractor gates and place the paper about half way onto the tractor pins. Do not
push the paper past the tractors into the area of the paper jam sensor.
6. Adjust the tractor width on the right side. (Note that the left tractor is used as the
home position and should not be moved.)
NOTE: A slight amount of side-to-side tension should be introduced into the first
7. Go to the next topic to load cut-sheet paper.
3–20
sheet when placing the paper on the input tractors. The right tractor should
be set far enough to the right so that there are no wrinkles, looseness, etc. in
the paper. Be careful not to set the right tractor too far to the right, however,
as too much tension may cause the paper holes to tear away from the tractor
pins.
Tractor Gate
Consumables