Printronix L5000 Series Maintenance Manual page 114

5. Remove the new toner cartridge from its package.
6. With the cover tape facing up, begin inserting the cartridge into the toner hopper,
and slowly pull off the cover tape in the direction of the arrow. Remove the last
of the tape just as the cartridge is completely inside the hopper.
7. Align the notch with the pin on the developing unit, and push the new toner
cartridge as far as possible into the toner hopper.
8. Rotate the toner cartridge clockwise until it stops.
9. If any toner has spilled, remove it with wet tissue paper or a toner vacuum.
10. Close the front upper cover.
3–52
Positioning Pin
Toner Hopper
Cover Tape
Toner Cartridge
Notch
Consumables