Developer Bottle
6. Locate a new developer bottle.
7. On the developing unit, remove the three cover screws and the cover.
The toner sensor is sensitive to both electrostatic discharge (ESD) and positional
adjustment. Do not touch the sensor with your hand or jar it from its factory-set
position.
8. Shake the developer bottle several times, open the cap, and screw the nozzle on
tightly.
9. Pour the entire bottle of developer powder into the developing unit evenly, while
rotating the roller knob counterclockwise.
Consumables
Nozzle
Cap
Screw
(3)
Cover
CAUTION
Developing Unit
Knob
3–41