Solenoids; Paper Feed Cassette - Printronix L5000 Series Maintenance Manual

Page counts, service levels: Vol. 1 4–5
Paper
backward–feed sensor: Vol. 2 10–98
detection, theory: Vol. 1 5–20
feed section, theory: Vol. 1 5–19
jams
cut–sheet paper: Vol. 1 7–19
detection sensors. See Jam detection
sensors.
fanfold paper: Vol. 1 7–14
loading
cut–sheet: Vol. 1 3–21
fan–fold: Vol. 1 3–18
theory: Vol. 1 5–22
near–end sensor: Vol. 2 10–98
output
gate solenoid (EGSL): Vol. 2 10–59
sensor 0 (EPS0): Vol. 2 10–80
sensor 1 (EPS1): Vol. 2 10–81
theory: Vol. 1 5–25
output section, theory: Vol. 1 5–19
parking, theory: Vol. 1 5–27
sensors
paper empty: Vol. 2 D–13
paper near–end: Vol. 1 5–40
paper output (EPS0): Vol. 1 5–41
paper register: Vol. 2 D–13
paper size: Vol. 2 D–11
paper timing: Vol. 2 D–14
specifications: Vol. 2 A–5
transport, theory: Vol. 1 5–24
transport section, theory: Vol. 1 5–19
Paper Empty–fanfold paper (Error 02)
upon power–on: Vol. 1 7–32
when loading/printing: Vol. 1 7–33
Paper feed cassette: Vol. 1 3–23, 5–20; Vol. 2
D–5, D–12
Paper feed section, cleaning: Vol. 1 4–19
Index–8
Paper guide interlock switch: Vol. 2 D–17
Paper Jam at Drum (Error 03): Vol. 1 7–34
Paper Jam at Drum (Error 11): Vol. 1 7–49
Paper Jam at Entrance (Error 16): Vol. 1
7–56
Paper Jam at Entrance (Error 1B): Vol. 1
7–65
Paper Jam at Exit–face down (Error 13): Vol. 1
7–52
Paper Jam at Exit–face up (Error 13): Vol. 1
7–51
Paper Jam at Fuser (Error 04): Vol. 1 7–36
Paper Jam at Fuser (Error 05): Vol. 1 7–37
Paper Jam at Fuser (Error 12): Vol. 1 7–50
Paper size, cassette: Vol. 1 3–23, 5–20; Vol. 2
D–12
Paper stacker: Vol. 2 E–1
Paper transport, system monitoring, theory:
Vol. 1 5–39
Park fanfold paper command, theory: Vol. 1
5–76
Part numbers, spares: Vol. 2 C–3
Parts list: Vol. 2 C–1
by description: Vol. 2 C–5
Perforation cutter, drive, theory: Vol. 1 5–35
Photoconduction section, theory: Vol. 1 5–7
Photoreceptor drum
cleaning: Vol. 1 4–21
disposal: Vol. 1 3–39
installation: Vol. 1 3–3
peripheral equipment: Vol. 2 10–21
replacement: Vol. 1 3–31
Physical characteristics: Vol. 2 A–8
Pickup motor encoder: Vol. 2 D–15
Pickup roller unit: Vol. 2 10–65
Pickup rollers, cleaning: Vol. 1 4–38