Printronix L5000 Series Maintenance Manual page 144

5. Loosen the two thumb screws, and remove the chargers by pulling them toward
you.
Thumb Screws
6. Place the chargers on a flat, clean work surface.
7. Using the brush cleaner and the wire cleaner, clean the chargers by removing the
dust and dirt on the wires (in the same manner as cleaning the main charger, on
page 4–24). Be sure that all wires are cleaned thoroughly (the pre-charger
contains one wire, while the transfer/separator charger contains two wires). When
dirt is caked on, the wires feel gritty. When clean, the wires feel smooth.
8. After cleaning, return the chargers to their original positions. Fasten the charger
screws to secure them.
4–26
Pre-charger
Transfer/Separator Charger
Scheduled Maintenance