Setting The Stacker Page Length - Printronix L5535 Operator's Manual

Chapter 2

Setting The Stacker Page Length

NOTE: Normal Mode supports up to 28 lb. bond (105 g/m
Setting The Stacker Page Length
Set the stacker page length to match the actual page length. On the
side of the stacker, locate the adjustment knob and the window
containing a measuring gauge (a pointer with a scale). Rotate the
knob until the pointer matches the page length being used. See the
illustration on page 40.
NOTE: If the printer page length does not match the stacker page
42
11.0
11.5
12.0
Mode must be used for media weights greater than 34 lb.
2
bond (128 g/m ). Some media that are 28 lb. bond (105 g/
2
m ) and higher require Heavy Mode for reliable stacking.
length, the timing of the stacker swinger arm will be
incorrect, resulting in a folding error.
Set the printer page length by following the instructions for
changing printer configurations. Refer to the User's Manual
for details.
5.3
5.0
4.8
2
). Heavy