RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Moving Participants from the Entry Queue to the Destination conference or between conferences Based on
the Encryption Settings
Destination
Conference
Encryption Setting
No Encryption
Encrypt All
Encrypt When Possible
* System Flag =
FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILABLE_MODE
Recording Link Encryption
Recording Links are treated as regular participants, however the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF system flag must be set to YES if
a non-encrypted Recording Link is to be allowed to connect to an encrypted conference.
The following table summarizes the connection possibilities for a Recording Link that is to be connected to
a conference for each of the conference profile and Entry Queue encryption options.
Connections by Recording Link and Conference Encryption Settings
Conference
Profile Setting
Encrypt All
No Encryption
Encrypt when possible
Enabling Media Encryption for a Conference
Media encryption is enabled at three levels:
● MCU level -
Setting the Encryption Flags
Polycom®, Inc.
Current Participant Encryption Status
Encrypted
*Flag = NO
Move succeeds, connected encrypted
Move succeeds, connected encrypted.
Move succeeds,
Move succeeds,
connected
connected
encrypted
encrypted
Recording Link Connection Status according to flag:
ALLOW_NON_ENCRYPT_RECORDING_ LINK_IN_ENCRYPT_CONF
YES
Connected encrypted if possible,
otherwise connected non-encrypted.
Connected non-encrypted
Connected encrypted if possible,
otherwise connected non-encrypted.
*Flag = YES
*Flag = NO
Move succeeds, connected
non-encrypted
Move fails, disconnected.
Move succeeds,
connected
non-encrypted
Connected only if encrypted, otherwise
disconnected
Connected non-encrypted
Connected encrypted if possible,
otherwise connected non-encrypted.
Non-Encrypted
*Flag = YES
Connected only if
endpoint was a
defined participant
in the source
conference.
Otherwise, move
fails.
NO
177