Clearing A Schedule Time - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode
Select the daily schedule that you want to copy to, or press the CL key if
you are finished copying schedules. When you have made your selection, a
confirmation of any change will print and the 'copy to' prompt will then
reprint.
Note
All events previously assigned to the schedule to
which you are copying will be replaced with the
schedule from which you are copying.

Clearing a Schedule Time

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 4-SCHEDULE
Important!
Changes made to the Time Schedule will
not take affect until after you have ended the
programming session at which time, the
System will override the current access level
with the appropriate level as determined by
the schedule.
To clear a daily schedule or the entire Time Schedule, select 4-SCHEDULE
from the Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 5-CLR from the Schedule Menu:
---- SCHEDULE MENU -----
)
1-ADD 2-REMOVE 3-VERIFY
4-COPY 5-CLR 6-HOLIDAY
88