Id Status Inquiry - OSI Security Devices OMNILOCK OM100 Series User Manual

Note
Setting the Service code time to 00:00
provides a 'One-time' use code.
Setting the Service code time to 99:99 will
allow the Service code to remain valid
indefinitely.
To indicate the status of the Service code time, the lights will flash as
follows:
Green Time set.
Red-Red Invalid time.

ID Status Inquiry

Programming Code Required:
Master Code or Submaster Code
The ID Status Inquiry command allows you to query the system about
whether a particular User Code ID Number is currently in use, on hold or is
unassigned.
To inquire about the status of any User Code ID Number, enter the
following command sequence while in the Command mode:
ID + CL
Programming in Command Mode
29