OSI Security Devices OMNILOCK OM100 Series User Manual page 92

Programming in Menu Mode
confirmation made for groups that you have selected until after you have
finished your selections.
If you press the CL key before making any selections, the System will
set access level Unlocked at the specified event time. Otherwise, for each
of the selected groups that contain a Supervisor code, the following prompt
will print in succession:
GROUP # n SUPERVISED?
1-YES 2-NO
Select 1-YES if you want the security level of the code group indicated by n
to be set to supervised. Otherwise, select 2-NO.
If you select 1-YES, when you have responded to all of the required
prompts, a confirmation of the changes made will print. The confirmation
will be similar to the following:
ACCESS: U/C s + + -
Where U/C represents Unlock with Code level and 's + + -' represents the
security level of code groups 1 through 4; (s) supervised, (+)
enabled/unsupervised, (-) disabled. The event time prompt will then reprint.
If you selected 2-NO to the Unlock With First Code prompt, the following
confirmation of the change will print and the event time prompt will reprint
ACCESS: UNLOCKED
Code Required
If you selected 2-CODE in response to the access level prompt, the
following prompt will print:
SELECT GROUPS TO ENABLE
(1-4, 5-ALL, CL-DONE)?
82