Removing Submaster Codes - OSI Security Devices OMNILOCK OM100 Series User Manual

Otherwise, the selected menu rights will be assigned to the specified
Submaster code and a confirmation of these changes will print. Once
completed, the Submaster ID prompt will reprint.
If Menu options 1, 2 and 3 were selected for Submaster ID 502 the
confirmation would print as follows:
SUB #502: 1,2,3
Note
Menu privileges assigned to a Submaster
code also apply while programming in the
Command mode.

Removing Submaster Codes

Programming Code Required:
Master Code
To remove a Submaster code from the System, select 2-CODES from the
Main Menu:
)
------ MAIN MENU ------
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 4-SUBMASTERS from the Codes Menu:
------ CODES MENU -----
)
1-USER 2-SERVICE 3-AUDIT
4-SUBMASTERS 5-MASTER
Next, select 2-REMOVE from the Submaster Codes Menu:
- SUBMASTER CODES MENU -
)
1-ADD 2-REMOVE 3-VERIFY
4-HOLD 5-RESTORE
Programming in Menu Mode
69