Programming in Menu Mode
Important!
If you change the length of your Master
code, all other codes are erased! Also, if you
lose your Master Code, you will have to
reset the System. (See Resetting The
System page 118.). Resetting the system
will reset the Master Code to the factory
default and erase all other programming.
Don't lose your Master Code!
To change the Master code, select 2-CODES from the Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 5-MASTER from the Codes Menu:
)
------ CODES MENU -----
1-USER 2-SERVICE 3-AUDIT
4-SUBMASTERS 5-MASTER
The following prompt will print:
NEW CODE LENGTH (4-9)?
Enter the desired code length.
74