Holiday List - OSI Security Devices OMNILOCK OM100 Series User Manual

Time Schedule and Holiday List

Holiday List

The daily time schedule for any given date may be overridden by the
Holiday List. A holiday description consists of a month and day, and the
daily schedule to use on that date. A typical holiday might be 12/25-SUN.
The System would then use Sunday's schedule on December 25, regardless
of what day of the week December 25 actually falls on. A maximum of 32
holidays may be added.
For example, let's say that the System is programmed to unlock at 8:00 a.m.
and lock again at 5:00 p.m., Monday through Friday, and you want your
facility to be closed for Memorial Day. For this scenario, you would simply
program the month and day of the holiday (i.e. May 29) and the schedule to
use. Since you want to extend the weekend by a day and both Saturday's
and Sunday's schedules are empty, you could specify either of these two
schedules to be used on the holiday instead of Monday's schedule. The
System would then set the access level to Code Required on Friday at 05:00
p.m. and would remain at that level until Tuesday at 08:00 a.m., when it
would unlock.
If a daily schedule is not available that fits your needs for a particular date,
then either of the DY8 or DY9 schedules can be used. For example, let's
assume the same scenario as above, however, your facility will not reopen
until Tuesday at 12:00 p.m. In this case, you might want to program DY8's
schedule to set the access level to Unlocked at 12:00 p.m. and Code
Required at 05:00 p.m. You would then set May 30 as a holiday and specify
DY8's schedule for use on that day. The System would then set the access
level to Code Required on Friday at 05:00 p.m. and would remain at that
level until Tuesday at 12:00 p.m., when it would unlock.
12