Verifying Submaster Codes - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode
The following prompt will print:
SUBMASTER ID (###)?
Enter the three digit ID number of the Submaster code you want to remove
or press CL if you are finished removing Submaster codes.
When you have entered the ID of a valid Submaster code, the following
prompt will print:
REMOVE SUBMASTER #502?
1-YES 2-NO
The three digit ID number indicated will be the ID number that you entered
above. To remove the specified Submaster code, press 1-YES. To abort
without removing the Submaster code, press 2-NO.
If 1-YES is pressed a confirmation similar to the following will print:
SUBMASTER #502 REMOVED
The Submaster Codes Menu will then reprint.

Verifying Submaster Codes

Programming Code Required:
Master Code
To verify Submaster codes (print a list of assigned Submaster code ID
numbers and their menu privileges), select 2-CODES from the Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 4-SUBMASTERS from the Codes Menu:
70