OSI Security Devices OMNILOCK OM100 Series User Manual page 51

------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 1-USER from the Codes Menu:
------ CODES MENU -----
)
1-USER 2-SERVICE 3-AUDIT
4-SUBMASTERS 5-MASTER
Note
A Submaster can not change other Submaster
codes or the Master code, therefore the Codes
Menu appears as shown below when a
Submaster code is used.
1-USER 2-SERVICE 3-AUDIT
Next, select 3-VERIFY from the User Codes Menu:
--- USER CODES MENU ----
)
1-ADD 2-REMOVE 3-VERIFY
4-HOLD 5-RESTORE
6-GROUPS 7-EXTEND
The following prompt will print:
PRINT PINs? 1-YES 2-NO
Select 1-YES if you want the PINs to be printed, otherwise select 2-NO.
Once you have made your selection, the following prompt will print:
PRINT GROUPS? 1-YES 2-NO
-------- CODES MENU --------
Programming in Menu Mode
41