Copying A Schedule Time - OSI Security Devices OMNILOCK OM100 Series User Manual

Copying a Schedule Time

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 4-SCHEDULE
Important!
Changes made to the Time Schedule will not
take effect until after you have quit the
programming session at which time, the System
will override the current access level with the
appropriate level as determined by the schedule.
To copy one daily schedule to another, select 4-SCHEDULE from the Main
Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 4-COPY from the Schedule Menu:
---- SCHEDULE MENU -----
)
1-ADD 2-REMOVE 3-VERIFY
4-COPY 5-CLR 6-HOLIDAY
The following prompt will print:
COPY FROM:
SCHEDULE (MON-1..DAY-9)?
Select the daily schedule that you want to copy. When you have made your
selection, a prompt, similar to the following, will print:
COPY MON TO:
SCHEDULE (MON-1..DAY-9)?
Programming in Menu Mode
87