Removing A Schedule Event Time - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode
Lockout
If you selected 3-LOCK in response to the access level prompt, a
confirmation of the change made will print as indicated below and the event
time prompt will then reprint.
ACCESS: LOCKOUT

Removing a Schedule Event Time

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 4-SCHEDULE
Important!
Changes made to the Time Schedule will not
take affect until after you have ended the
programming session at which time, the System
will override the current access level with the
appropriate level as determined by the schedule.
To remove a scheduled event from the Time Schedule, select 4-
SCHEDULE from the Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 2-REMOVE from the Schedule Menu:
) ---- SCHEDULE MENU -----
1-ADD 2-REMOVE 3-VERIFY
4-COPY 5-CLR 6-HOLIDAY
84