Submaster Codes; Manager Codes; Supervisor Codes - OSI Security Devices OMNILOCK OM100 Series User Manual

Access Levels and Codes
all other code lengths are five digits). The more digits used, the greater the
possible number of code combinations and the greater resulting security.
For security, you should change the Master Code before installing the
System . Write down your new Master code and store it somewhere safe
and separate from your list of all other System codes.

Submaster Codes

The System can be programmed with up to eight Submaster codes. The
Submaster codes function the same as the Master Code with the following
limitations -- Submaster codes can not:
Change the Master Code
Program other Submaster codes
Set Shutdown access level
A Submaster's authority may also be restricted to any combination of the
Main Menu programming options.

Manager Codes

Manager codes provide the ability to manually set the access level of the
System. The access level set will remain in effect until overridden by the
time schedule, a Master Code User, a Submaster Code User or a User with
Manager privileges. Limited group control (no supervisory settings) is also
provided. Manager codes are not subject to group control and are valid
under all access levels except Shutdown.

Supervisor Codes

Supervisor codes are reserved for users who have supervisory or managerial
responsibilities over a group of general users. A user with a Supervisor code
can control access by general users within the supervisor's group.
Supervisor codes have access at access level Code Required only.
6