Programming In Menu Mode; Holding The Printer - OSI Security Devices OMNILOCK OM100 Series User Manual

Chapter 7
Programming in Menu mode requires the use of the WP4000 wireless
printer. Before programming for the first time, familiarize yourself with the
printer controls and its operation (see Chapter 9, The WP4000 Printer).

Holding the Printer

Because the printer couples to the System optically, you must take care to
hold it as shown in Figure 2 below. If you move the printer so that it cannot
"see" the optical transmitter on the System, the printer will stop printing. If
this happens, you will have to press CL, then re-enter the command.
WP4000
Figure 2
WP4000B has IR port on bottom
Programming in
Menu Mode
WP4000B
Holding the Printer
31